HOME | 中文TEL:0086-519-88902618 88900007
  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)

SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)

Keywords:
Category: Vacuum dryer
\ Product Description SZG Series Conical Vacuum dryer (Vacuum Double cone dryer )…
Order
Detail Picture

SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)

   

                                                            (CE Certificate)                           (Pattent)

Product Description 

SZG Series Conical Vacuum dryer  (Vacuum Double cone dryer  ) (Rotary conical vacuum dryer) (RCVD Dryer)is a new generation drying device developed by our factory on the basis of combining the technology of similar equipment. It has two connecting ways, i.e. belt or chain. Therefore it is stable in operation. The special design guarantees two shafts realize good concentricity. Heat medium and vacuum system all adapt reliable rotating connector with the technology from USA. On this basis, we also developed SZG-A. It can carry out steeples speed change and constant temperature control. 
As a specialized factory in drying industry, we supply hundred sets to the customers every year. As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you.  

   
     

Principle 

As a specialized company in drying industry, we supply hundred sets to the customers every year. As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you. The biggest may be 8000L. Let heat source (for example, low pressure steam or thermal oil) pass through the sealed jacket. The heat will be transmitted to raw material to be dried through inner shell;Under driving of power, the tank is rotated slowly and the raw material inside it is mixed continuously. The purpose of reinforced drying can be realized; The raw material is under vacuum. The drop of steam pressure makes the moisture (solvent) at the surface of raw material reach the state of saturation and evaporate. The solvent will be discharged through vacuum pump and recovered in time. The inner moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can berealized within a short time.


  
  

Schematic of the structure

Features 
1.When oil is used to heat, use automatic constant temperature control. It can be used for drying biology products and mine. Its temperature of operation can be adjusted form 20-160 ℃ . 
2.Compared to ordinal dryer, its heat efficiency will be 2 times higher. 
The heat is indirect. So the raw material can not be polluted. It is in conformity with the requirement of GMP. It is easy in washing and maintenance. 

  

Installation diagram 


Options 
  1. Product charging by vacuum transfer system 
  2. Jacket bowl wall design for heating or cooling 
  3. WIP or CIP system  
    



   


Technical parameters 


                      item

spec

name

unit

100

200

350

500

750

1000

1500

2000

3000

4000

5000~10000

total volume

L

100

200

350

500

750

1000

1500

2000

3000

4000

5000~10000

working volume

L

50

100

175

250

375

500

750

1000

1500

2000

2500~5000

heating area

m 2

1.16

1.5

2

2.63

3.5

4.61

5.58

7.5

10.2

12.1

14.1

speed

rpm

6

5

4

4

4

power

kw

0.75

1.1

1.5

1.5

2

3

3

4

5.5

7.5

7.5

rotating height

mm

1810

1910

2090

2195

2500

2665

2915

3055

3530

3800

4180~8200

total weight

kg

825

1050

1350

1650

1800

2070

2250

3000

4500

5350

6000~12000

design pressure inside the tank

mpa

-0.09~-0.096

design pressure of jacket

mpa

0.3


Remark 
1.Speed adjusting motor of 0-6rpm might be chosen according to the user's requirements. The following aspects should be point out when to order: 
2.The above-mentioned parameters are calculated based on material density of 0.6g/cm3. If it's over, please point out. 
3.If certificate for pressure vessel is required, please point out. 
4.If glass lining for interior surface is required, please point out.
5.If the material is explosive, or flammable, the calculation should be made according to trial result.

  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
    None...
News
Products
  • HD Series Microwave Vacuum Drying Oven
    HD Series Microwave Vacuum Drying Oven
  • ZPD Series Vacuum Harrow Dryer( Vacuum Harrow Impeller Dryer)
    ZPD Series Vacuum Harrow Dryer( Vacuum Harrow Impeller Dryer)
  • YZG Series Round Shape Vacuum Dryer
    YZG Series Round Shape Vacuum Dryer
  • SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
    SZG Series Conical Vacuum Dryer( Rotary Conical Vacuum Dryer)
  • QJP Series Vacuum Hollow Blade Dryer(Vacuum Hollow impeller Dryer)(Vacuum Hollow Paddle Dryer)
    QJP Series Vacuum Hollow Blade Dryer(Vacuum Hollow impeller Dryer)(Vacuum Hollow Paddle Dryer)
  • LJG Series Vertical Stirring Vacuum Dryer
    LJG Series Vertical Stirring Vacuum Dryer
  • HGP Vacuum Drum Dryer (Flaker)
    HGP Vacuum Drum Dryer (Flaker)
  • GZLS Series Vacuum Freeze Dryer(Lyophilizer )
    GZLS Series Vacuum Freeze Dryer(Lyophilizer )
Top
  • 咨询热线(TEL)
  • +86-13776887793
  • Skype:jennywang780401
  • Skype:jennywang780401