HOME | 中文TEL:+86-0519-88902618, 88910618

PYG Series Pressure Spray Dryer With Top Air Outlet

Keywords:
Category: Spray dryer
Working principle The liquid feeding can be solvent, suspension liquid or emulsions. The material is fed into the atomizer inside the XX distributor which located in the top tower through the high pressure pump.The liquid is …
Order
Detail Picture

 PYG Series Pressure Spray Dryer With Top Air Outlet


Working principle 

The liquid feeding can be solvent, suspension liquid or emulsions. The material is fed into the atomizer inside the XX distributor which located in the top tower through the high pressure pump.
  1. The liquid is atomized by the pressure spray gun and then enters the dry air flow. and the air flow will carry the atomized droplets toward the inserted fluidized bed by the air flow , during this period ,the material is dried . 
  2. While the particle enters the fluid bed dryer, the air will make opposite direction movements upward and exhausted from the top of the drying tower.
  3. The Ultrafine particles Separated from the exhaust air are recycle l to the drying tower.
  4. The particle fluidization in the fluid bed ,the fine circulation and the particle movements inside the dry air take place in an air environment whose dust density is higher than the one of traditional drying system. This design can overcome the sticky problem on the surface of the particles, and the particles with high moisture content can be processed.
  5. The water content of the particle entering the fluid bed can be controlled within the certain range .in this way ,it can obtain big particle and structure change(agglomeration and granulating).
  6.  If necessary, the final drying and cooling of the material can be carried at the outside fluid bed dryer which connecting with the outlet of the inserted fluid bed dryer.
Feathers:
1.There is large adjusting range in particle size and moisture content of finished product;
2.Total height of the equipment is lower than the one of the concurrent spray tower;
3.Save energy, because the air –returnt chamber with top air outlet evaporate at the high negative pressure area of the upper section of the tower , it can low the evaporating temperature .it not only saves the heatsource ,but also saves energy.
4.The quality of the product is good, the particle size is uniform, and the adjusted range for the particle size is wide. the lustre and solubility of the particle is better .


Application:
Foodstuff: coffee,milk product, egg product, condiments, maltodextrin, soup, vegetable protein, yeast, etc
Chemical industry: detergent , dyes, fertilizers, inorganic salt, pesticides, 




    None...
    None...
News
Products
  • PYG Series Pressure Spray Dryer With Top Air Outlet
    PYG Series Pressure Spray Dryer With Top Air Outlet
  • WYG Series Horizontal pressure spray dryer
    WYG Series Horizontal pressure spray dryer
  • DYP Series pressure spray dryer(Mixing-flow type)
    DYP Series pressure spray dryer(Mixing-flow type)
  • ZLG Series Spray Dryer For Chinese Traditional Medicine Extract
    ZLG Series Spray Dryer For Chinese Traditional Medicine Extract
  • YPG series Pressure spray (cooling) Dryer
    YPG series Pressure spray (cooling) Dryer
  • XLP series Sealed Circulation(Sealed-loop) Centrifugal Spray Dryer
    XLP series Sealed Circulation(Sealed-loop) Centrifugal Spray Dryer
  • WPG Series Asepsis Spray dryer
    WPG Series Asepsis Spray dryer
  • QPG Series  Air Stream Spray dryer(drier)
    QPG Series Air Stream Spray dryer(drier)
Top