HOME | 中文TEL:0086-519-88902618 88900007
  • XSG Series Spin Flash dryer
  • XSG Series Spin Flash dryer
  • XSG Series Spin Flash dryer

XSG Series Spin Flash dryer

Keywords:
Category: Air stream dryer
Product Description Absorbed the foreign advanced equipment and technology,our factory and Shenyang Chemical Research Institute of the…
Order
Detail Picture

XSG Series Spin Flash 


   

    

 Product Description 
Absorbed the foreign advanced equipment and technology,our factory and Shenyang Chemical Research Institute of the Chemical Ministry of the State have developed this machine.This is a new kind of drying equipment used for drying the materials,such as paste state, cake state, thixotropy,thermal senstive powder and particles.Our factory is equipped with the testing sample machine,which can be used for carrying out the drying tests of various feeds for our users and for to provide the parameters to select the applicable machine. 


      
Principles
The hot air enters into the bottom of the dryer in tangent direction.Under the driving of the stirrer,a powerful rotating wind area is formed.The paste state materials enter into the dryer through the screw charger.Under the powerful function effect of stirring at high-speed roation,the materials are distributed under the function of strike,friction and shearing force.The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried.The dried materials after the de-watering will go up with the hot-air flow.The grading rings will stop and keep the big particles.Small particles will be sidcharged out of the dryer from the ring center and will be collected in the cyclone and dust collector. The not-fully-dried or big piece materials will be sent to the wall of the equipment by centrifugal force and be smashed again after they fall down to the bottom. 

       


Flow chart 

Feeding system
For the feeding system ,normally , we choose double screw feeder .Double Shaft with Specially Designed Blades for lumps break as to ensure the raw material into the drying chamber smoothly . And drive Through motor & Gear Box


       
Drying chamber

For the drying chamber , it consists of the bottom stirring section , middle section with jacket and top section.Some times , the explosion vent on the top duct on request .


   
Dust collecting system 
For the dust collecting system, it has several ways .
The Finished product collected is using cyclones, and/or bag filters. Typically, cyclones are followed by scrubbers or bag filters for final cleaning of the exhaust gases to meet current emission requirements. 

       

Feature 

1.The collection rate of finished product is very high.
To adopt cyclone separator with high efficiency and low resistance (the collection rate can be above 98%), together with air chamber type of pulse cloth bag deduster(the collection rate can be above 98%)
2.To control final water content and fine of finished product efficiently 
 To control final water content and fine of finished product through adjusting screener and inlet air speed.
3.no materials stick on the wall 
Continuous high-speed air flow washes out the materials stayed on the wall strongly in order to clear the phenomenon that materials stay on the wall 
4.This machine is good at processing thermal sensitive materials
 The bottom of main machine belongs to high temperature area. The air speed in this area is very high, and the material can hardly contact heat surface directly, so there is no worry about burning and color changing.
5.YIBU Spin Flash dryers are designed for continuous drying of cohesive and non-cohesive pastes and filter cakes, as well as high-viscosity liquids. The main components in an YIBU Spin Flash plant are a feed system, the patented drying chamber and a bag filter. Widely acclaimed by customers in a variety of industries all over the world, this patented process provides a faster and more energy-efficient alternative to spray drying. With more than 150 YIBU Spin Flash dryer installations world-wide YIBU DRYING combines experience and cutting-edge technology into added-value solutions for our customers. Elevated drying temperatures can be used with many products since the flashing off of surface moisture instantly cools the drying gas without appreciably increasing the product temperature which may damage its quality.
6. Wet material is dispersed into a stream of heated air (or gas) which conveys it through a drying duct. Using the heat from the airstream, the material dries as it is conveyed. Product is separated using cyclones, and/or bag filters. Typically, cyclones are followed by scrubbers or bag filters for final cleaning of the exhaust gases to meet current emission requirements. 
7. The feed system consists of a feed vat where a discontinuous flow of product is buffered and fragmented by an agitator prior to continuous drying. A variable speed feed screw (or pump in the case of fluid feed) forwards the product to the drying chamber.
8. The rotor at the conical base of the drying chamber fluidizes product particles in a drying-efficient hot air flow pattern in which any wet lumps are rapidly disintegrated. Hot air is supplied by a temperature-controlled air heater and speed-controlled fan, entering the drying chamber at a tangent in order to establish a turbulent, whirling air flow.
9. Airborne, fine particles pass through a classifier at the top of the drying chamber, while larger particles remain in the air flow for further drying and powdering.
10. The drying chamber is rigidly designed to withstand pressure shock in the event of explosive combustion of flammable particles. All bearings are effectively protected against dust and heat.

    


 Schematic of structure 

Technical parameters


spec

Barrel diameter(mm)

Main machine dimensions(mm)

Main machine power ( kw )

air velocity ( m3/h )

Water evaporation capacity ( Kg/h )

XSG-200

200

250×2800

5-9

300-800

10-20

XSG-300

300

400×3300

8-15

600-1500

20-50

XSG-400

400

500×3500

10-17.5

1250-2500

25-70

XSG-500

500

600×4000

12-24

1500-4000

30-100

XSG-600

600

700×4200

20-29

2500-5000

40-200

XSG-800

800

900×4600

24-35

3000-8000

60-600

XSG-1000

1000

1100×5000

40-62

5000-12500

100-1000

XSG-1200

1200

1300×5200

50-89

10000-20000

150-1300

    XSG-1400

1400

1500×5400

60-105

14000-27000

200-1600

XSG-1600

1600

1700×6000

70-135

18700-36000

250-2000

XSG-1800

1800

1900x6800

90~170

 

 

XSG-2000

2000

2000x7200

100~205

 


  • XSG Series Spin Flash dryer
  • XSG Series Spin Flash dryer
  • XSG Series Spin Flash dryer
    None...
News
Products
  • XSG Series Spin Flash dryer
    XSG Series Spin Flash dryer
  • QG Series Air stream Dryer( Air Stream Ring Dryer)
    QG Series Air stream Dryer( Air Stream Ring Dryer)
  • JG Series Air Stream Dryer
    JG Series Air Stream Dryer
  • FG Series Positive and Negative Two Grades Air Stream Drying Machine
    FG Series Positive and Negative Two Grades Air Stream Drying Machine
  • DG Series  Air Stream Dryer For Starch
    DG Series Air Stream Dryer For Starch
Top
  • 咨询热线(TEL)
  • +86-13776887793
  • Skype:jennywang780401
  • Skype:jennywang780401